80-200W Anti-Explosion LED high bay light
Home » Outdoor LED lights » Recommended LED Product » 80-200W Anti-Explosion LED high bay light

150W Explosion-proof Led High bay Light
SIWIN all series of explosion-proof LED high bay light (30-200W) have passed explosion-proof certification. Ex Grade: ExnRIIT4Gc. This kind of led light can be used in the places that easily generate inflammable and explosive gas or dust, in addition to mine. Such as the gas station, chemical warehouse and factory, smelting factory, etc.

Specialty:
1,Using high power COB LEDS, the lamp’s luminous efficiency can reach 80-100LM/W, and CRI>80Ra;Fins heating dissipation design enables the LED Tj within 85℃, and power up to 200W, lifespan more than 35,000 hours; with protecting rate: IP65.
2,The high bay light is verified and certified according to standards for safety as below: GB3836.1-2010 Explosive atmospheres Part 1: Equipment General Requirements GB3836.8-2003 Explosive atmospheres Part8: Electrical apparatus for explosive gas atmos-pheres-Part8: Encapsulation “n” with Ex-marking ExnRⅡT4Gc.
3, The light can be used in: Normally, a place in which an explosive atmosphere in the form of explosive dust or combustible fibre in mixture with air is likely to occur continuously or frequently in short time, or for long periods in normal operation. According to the classification of explosion proof grade and application, the light can be use in Zone2.Surface temperature of item for safety:≤135℃,such an area lighting site like factory,warehouse,except mine.

Product Size(mm)
80W
80W led explosion proof
100W
100w high bay
120W
120w high bay lights
150W
150w high bay lights
200W
200w high bay lights

Explosion-proofParameters

1)Explosion-proof(Grade)

1, Explosion proof form code of explosion proof electric equipment, nR for restrict breathing type, the others: D for explosion suppression type; IA for flameproof intrinsically safe type; MB for pouring type ….;

2,Explosion proof electrical equipment is divided into type Ⅰ,Ⅱ,Ⅲclass; class I used for coal mine gas environment; class II, III used for other explosive gases electric equipments except coal mines which can easily generate gas.

3, Electrical equipment external surface temperature range ( T4 means the temperature of any point on the external surface of UFO explosion-proof mining lamp ≤ 135 ℃);

4,Electric equipment protection level, and has a corresponding relationship to its used place, Gc level of protection for the general, and it can be used in explosive gas environment –Zone 2;

2)Hazardous area classification

Explosive substance

Area definition

Chinese standard

 

Foreign standards

Gas(ClassⅠ)

Under normal circumstances, the explosive gas mixture continuously or long time existence.

Zone 0

Div.1

Under normal circumstances, the explosive gas mixture is likely to existent site

Zone 1

Under normal circumstances, the explosive gas mixture is not possible appear, Only in abnormal circumstances, occasionally or short time existed site ;

Zone 2

Div.2

Dust or fiber(ClassⅡ/ClassⅢ)

Under normal circumstances, explosive dust or combustible fibre and air mixture may be continuous, a short time frequent appear or long time existence.

 

Zone 10

Div.1

Under normal circumstances, explosive dust or combustible fibre and air mixture can not appear, just in case of abnormal condition, occasionally or short time appears.

1

 Zone 11

Div.2

3)Gas temperature group

Temperature category

Explosion proof electrical equipment surface temperature

Common explosive gas

T1

≤450℃

Methane、Toluene、Methyl ester、Ethane、Propane、Acetone、Acrylic acid、Benzene、Styrene、Carbon monoxide、Ethyl acetate、Acetic acid、Chlorobenzene、Methyl acetate、Ammonia、Acrylic ester、Two ether、City gas、Hydrogen、Water gas

T2

≤300℃

Methanol、Ethanol、Ethyl benzene、Propyl alcohol、Propylene、Butyl alcohol、Butane、Butyl acetate 、Amyl acetate、Cyclopentane、Butadiene、Epoxy propane、Ethylene、Acetylene

T3

≤200℃

Pentane、Amyl alcohol、Hexane、Hexyl alcohol、Heptane、Octane、Ring of ethanol、Turpentine oil、Naphtha、Petroleum (gasoline )、Fuel oil、Amyl alcohol four、Two ether、Acrolein、Hydrocarbon

T4

≤135℃

Acetaldehyde、Tetrafluoroethylene、Trimethylamine、Ethyl ether、Two ether

T5

≤100℃

Carbon disulfide

T6

≤85℃

Acid ethyl ester、Nitrous acid ethyl ester

This series explosion-proof lamp temperature group is T4, according to the above standard data, this series lamp can be used in the warehouse, workshop in the scope of T1, T2, T3, T4, and related places that require explosion-proof lamp lighting can be applied.

Specifictions:

Item No: SW-400HBL80W-Ex
LED Power: 80W   Ex-marking ExnRⅡT4Gc
Work Voltage: AC(100V~240V )/ frequency(50~60Hz)   Beam Angle: 100°
  Color Rendering Index: Ra>80
Power Factor(PF): > 0.97   Color Temperature: 2700K~7000K
Efficiency of the Power Supply: >90%   Life Span: >35000Hr
Luminous Efficiency: 80-100lm/W   Net Weight(kg): 8.3
Initial luminous Flux: 6400-8000lm   (MOQ pcs): 100
         
Item No.: SW-400HBL100W-Ex
LED Power: 100W   Ex-marking ExnRⅡT4Gc
Work Voltage: AC(100V~240V )/ frequency(50~60Hz)   Beam Angle: 100°
  Color Rendering Index: Ra>80
Power Factor(PF): > 0.97   Color Temperature: 2700K~7000K
Efficiency of the Power Supply: >90%   Life Span: >35000Hr
Luminous Efficiency: 80-100lm/W   Net Weight(kg): 10.5
Initial luminous Flux: 8000-10000lm   (MOQ pcs): 100
         
Item No.: SW-400HBL120W-Ex
LED Power: 120W   Ex-marking ExnRⅡT4Gc
Work Voltage: AC(100V~240V )/ frequency(50~60Hz)   Beam Angle: 100°
  Color Rendering Index: Ra>80
Power Factor(PF): > 0.97   Color Temperature: 2700K~7000K
Efficiency of the Power Supply: >90%   Life Span: >35000Hr
Luminous Efficiency: 80-100lm/W   Net Weight(kg): 10.5
Initial luminous Flux: 9600-12000lm   (MOQ pcs): 100
         
Item No.: SW-400HBL150W-Ex
LED Power: 150W   Ex-marking ExnRⅡT4Gc
Work Voltage: AC(100V~240V )/ frequency(50~60Hz)   Beam Angle: 100°
  Color Rendering Index: Ra>80
Power Factor(PF): > 0.97   Color Temperature: 2700K~7000K
Efficiency of the Power Supply: >92%   Life Span: >35000Hr
Luminous Efficiency: 80-100lm/W   Net Weight(kg): 12
Initial luminous Flux: 12000-15000lm   (MOQ pcs): 100
         
Item No.: SW-400HBL200W-Ex
LED Power: 200W   Ex-marking ExnRⅡT4Gc
Work Voltage: AC(100V~240V )/ frequency(50~60Hz)   Beam Angle: 100°
  Color Rendering Index: Ra>80
Power Factor(PF): > 0.97   Color Temperature: 2700K~7000K
Efficiency of the Power Supply: >92%   Life Span: >35000Hr
Luminous Efficiency: 80-100lm/W   Net Weight(kg): 13.5
Initial luminous Flux: 16000-20000lm   (MOQ pcs): 100

Diagram of degradation for Luminous
led high bay lamps
Photomatric Data
led lighbay lightings
Illumination Distance/illuminance/Irradiated Area
80W
80w led high bay light
100W
100w
120W
120W
150W
150w
200W
200W
Packing
led high bay light packing
Using and installation instructions
led lighbay lightings install
1,Please firstly install the reflector properly on the heat sink, and screw down.
2,Then screw down the hoop into the top cap.
3, Hang the body lamp on the installation site.
4, Please hang the chaining steel wire on another installation device.
5, Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.

Attentions:
1.A licensed electrician must undertake this installation. Please check the lamp carefully before installation,Forbidden to open the lid when charged;
2.Please follow up the installation procedures, make sure the screws been wrested very tightly, the wires been connected properly, as attached installation instruction.
china led highbay lights manufacturers
china led high bay factory
china led lighting factory
[contact-form-7 id="2122" title="Contact form 1"]


Send Enquiry

Full name:
Telephone:
Email:
Comments:
This entry was posted in Outdoor LED lights, Recommended LED Product. Bookmark the permalink.

Other Items in this category

80-200W Anti-Explosion LED high bay light

80-120W LED Flood lights